Search

MESSAGE

OUR PRODUCTS

ABOUT US

CONTACT US

Add: Rm1210,Shijihuanqiu Building,Shengli

Street,Weifang,China

Tel: +86-536-8987558

Fax: +86-536-8987559

E-mail: info@dekenag.com 

Web: www.dekenag.com

Use and maintenance technology of seed cleaning machine

Use and maintenance technology of seed cleaning machine

 

Author:Dekenag  Alice

 

The multiple seed selection machine has a wide adaptability. It can select the seeds of wheat, rice, corn, sorghum, beans, rape, forage grass and green manure by changing the sieve and adjusting the air volume. The use and maintenance requirements of the machine are high, a little neglect will affect the quality of seed selection. A brief description of the operation and maintenance of the machine is given below:

1. Handpick machine had better be in indoor operation, machine park place wants flat, firm, park position should consider to discharge dust convenient.

 

2. In the process of changing varieties, it is necessary to remove the remaining seed grains in the machine and keep the machine running for 5 to 10 minutes. At the same time, adjust the handle switch several times to eliminate the remaining seeds and impurities deposited in the front, middle and back rooms.

 

3. If the conditions are limited, and must be in the outdoor operation, should find shelter from the wind machine, and should be placed downwind to reduce the impact of wind on the selection effect. If the wind speed is greater than 3, the installation of wind barriers should be considered.

 

4. Before operation, check the fastening of connecting screws in each part, the flexible rotation of driving parts, normal sound, and proper tensioning of driving tape.

 

5. Lubrication points should be lubricated before each operation, and cleaning and inspection should be conducted after completion, and troubleshooting should be done in a timely manner.

 

If you need to reprint, please indicate the source, thank you for your cooperation.