Walking Type Paddy Rice Transplanter

1. What is Paddy Rice Transplanter?

 

The paddy rice transplanter is an agricultural machine that implants rice seedlings into rice fields. When planting, firstly, several rice seedlings are taken from the seedbed by mechanical claws to implant the soil in the field. In order to keep the angle between the seedbed and the ground at right angles, the front end of the mechanical claw must adopt an elliptical action curve. The action is done by a planetary mechanism of a rotating or deforming gear, and the advancing engine can simultaneously drive these moving machines. The rice transplanter must have a slippery wheel and a floating design when traveling on the soil. If the seedlings are cut into pieces, the rice seedlings are taken out from the specific seedling box and then planted mechanically.

 

2. Paddy Rice Transplanter Types

 

The rice transplanter is usually sorted by operation mode and insertion speed. According to the operation mode, it can be divided into a walking type rice transplanter and a riding type rice transplanter. According to the insertion speed, it can be divided into ordinary rice transplanter and high speed rice transplanter. The walk-in rice transplanters are all ordinary plug-in machines; the ride-in rice transplanters have ordinary rice transplanters and high-speed rice transplanters.

 

3. Paddy Rice Transplanter Structure

 

The composition of the transplanting parts of the various transplanters is basically the same:

The human transplanter consists of a box, a sub-plugging mechanism, a frame and a floating body (boat plate).

The self-propelled motorized rice transplanter is also provided with a power drive, a walking device, a feeding mechanism and the like.

 

4. DEKEN Walking type Paddy Rice Transplanter Basic Specification

 

DEKEN Walking Type Paddy Rice Transplanter
Model	2Z-430
Brand	DEKEN
Type	Two wheels, three floating plates type
Walking wheel	Rubber tire needle driving wheel
Overall dimension(L*H*W)(mm)	2460*1480*860(980)
Weight(kg)	175
Engine	B&S 93400
Power(hp/rpm)	3.5/3600
Variable speed	Forward 2 gears,backward 1 gear
Efficiency(ha/h)	0.14～0.28
Working speed(m/s)	0.31～1.10
Rows	4
Rows distance(mm)	300(fixed)
No.of seeding(per hole)	35(adjustable)
No.of plant(per 3.3 m2)	45	50	60	70	80	90
Plant distance(mm)	223	200	180	146	130	117
www.dekenag.com

 

 

5. Paddy Rice Transplanter Installation and commissioning

 

(1) Machine installation

 

The basic structure of the rice transplanter is composed of an engine, a gearbox, a steering clutch, a driving wheel, a steering and adjusting mechanism, a picking amount adjusting mechanism, and a shifting device. When installing the user, be sure to install it correctly according to the specific requirements of the transplanter's manual under the guidance of the technician.

 

(2) Inspection after installation

 

In order to ensure that the rice transplanter is in good working condition after being put into use, after the whole installation of the rice transplanter is completed, it is necessary to carry out a comprehensive inspection of the corresponding components. According to the corresponding operation steps of the manual, first check the flexibility of the components of the sports class. For the installation part where the jamming phenomenon exists, it is necessary to fill the lubricating oil in time. When checking the degree of response to the lever portion of the rice transplanter, observe whether the clutch, throttle, and engine speeds are running well during the rotation of the handle. For fixed components, tightening is required again before use. After the safety of various types of components is installed, the overall operation status of the rice transplanter is tested, and the safety operation problems are found in time, and effective measures are taken to ensure that the overall operation quality of the rice transplanter meets rice planting. standard.

 

(3) Commissioning

 

In order to ensure that the rice transplanter can perform its own running performance in rice planting after assembly, it is necessary to test the overall running state of the rice transplanter before it is actually put into use. Once the phenomenon of poor running condition is found, it is necessary to find the cause in time. In the case of improper installation of the components, the running performance of the rice transplanter must be affected. To do this, you will need to follow the installation instructions to perform the appropriate installation during the installation process. After all the installation is completed, start the engine and let it idle for about 15 seconds. During this period, observe the rotation effect of each component, find out the safe operation problems in time, and take effective measures to deal with it in time. The best running effect of the machine.

 

 

6. Basic requirements for rice transplanter operation

 

(1) Preparation before transplanting

 

Before the rice transplanting, the operator responsible for the rice transplanter should carry out comprehensive inspection and debugging of the rice transplanter in advance, mainly for the flexibility of the rotation between the running parts and the presence or absence of a cassette between the parts. After all the inspection work is completed, the rotating parts should be properly lubricated in time to ensure that the rice transplanter can operate normally and ensure the smooth operation of the whole transplanting work.

 

(2) Preparation of seedlings

 

In the process of carrying out the seedlings, it is necessary to move the empty seedling box to the other end of the guide rail in advance, and then carry out the shipment of the seedlings, so that the seedlings can be effectively prevented from being inserted to some extent. In the actual packing process, it is necessary to pay full attention to the fact that the block should be kept tightly attached to the box, but the phenomenon of the seedling arching cannot occur and the joints of the two blocks should be aligned, but it cannot appear. Void. When necessary, the block should be sprinkled with the box, so that the slide is still smooth and unimpeded, and the transplant is smoothly carried out. In addition, it is necessary to strictly determine the specific plant spacing and the number of seedlings per hole in accordance with the requirements of agronomic standards, and timely adjust the corresponding good plant spacing and the amount of sputum, so as to fully guarantee the specific number of field seedlings.

 

(3) Depth adjustment of rice transplanter

 

First, according to the depth of the mud feet of Daejeon, the corresponding depth of the rice transplanter is set. In addition, the softness and hardness of the soil should be fully noticed. The hardness of the soil is controlled by the sensitivity of the contouring mechanism in the rice transplanter to control the consistency of the depth of the rice transplanter, thereby fully ensuring the seedlings in the water. The strip does not drift, and the depth of the transplant is relatively suitable.

 

(4) Select the appropriate transplant route

 

In terms of the choice of the transplant route, it is necessary to set the appropriate transplant route according to the current specific situation. In the actual route selection, the correct use of the marker and the measuring device should ensure that the rice transplanter walks in a straight line, ensuring the straightness of the transplanting and the distance between the adjacent rows.

 

(5) Quality requirements for transplanting operations

 

It is well known that the quality of mechanized transplanting operations is decisive for the high yield of rice and stable yield. Therefore, in the actual transplanting work, we must attach great importance to the quality of the transplanting. However, there are strict requirements for the quality of the transplant work, and the following structural aspects are specifically reflected:

 

The first so-called leak insertion refers to the situation in which the transplanter does not have seedlings in the inserted hole during the actual transplanting process. And to control the leakage rate to less than five percent, to meet the quality requirements of the transplant.

 

Secondly, the injury seedlings mainly refer to the wounds, stab wounds and cutting off of the stem base of the seedlings after the seedlings are inserted, and the scar rate must be less than 4%.

 

Third, rafting mainly refers to the phenomenon that the seedling rate of the seedlings is controlled to less than three percent after the seedlings are inserted and floated on the water surface.

 

The fourth is thick. It mainly refers to the insertion of the seedlings into the soil, and the leakage of the stems of the seedlings is more than 90% of the curved portion, and the hooking rate is less than 4%.

 

Fifth, it’s awkward. It mainly refers to the phenomenon that the seedlings are poured into the rice fields after insertion, and the leaves are slightly in contact with the mud surface, and the rate of lodging is controlled to less than 4%.

 

Sixth, the uniformity mainly refers to the closeness of the number of seedlings in each hole and the average number of plants. The pass rate of uniformity should be controlled to more than eighty-five percent.

 

 

7. Other Related Products

 

-DEKEN also supply disc plough, disc harrow, share plough, sprayer, fertilizer spreader, etc.

 

8. How to order ?

 

-After you decide to purchase, we will send you proforma invoice with our bank information, bring this PI to the bank, and ask to make T/T for the deposit. For single set, your machine can be delivered within 5 days after we getting the deposit, we will send to the port and deliver to you by sea.

-In case of for more handling charges, you can transfer 100% of the payment, we can arrange the products and shipping under your allowance

-If you still don't understand, please do not hestitate to ask me.

 

9. Why Choose Us? 

 

a. Strong Technical Support

 

Deken has professional and technical personnels to supply before-sale and after-sale service.

 

b. Top Quality Assurance

 

DEKEN has strict material selection

DEKEN self manufactured and installed

DEKEN has advanced equipments and first-class production technology

 

c. Sound after-sale system, sincere and all-aspect service

 

DEKEN products have 1 year warranty period and life-long aftersale parts service.

 

d. OEM service is acceptable, every products can be customized

 

DEKEN can also accept OEM for dealers around the world.

 

10. Videos